 |
FTI 45mm extrusions
were used to provide a 10' wide back-wall with angled wing-wals
for a tradeshow booth. Wire-mesh wings allowed products to
be positioned for easy viewing. Three (free standing)
support tables were provided with laminate tops & sliding-door
access for literature storage below. |
||
 |
FTI 30mm series extrusions were
used to construct (8) base frames with 1/2" thick acrylic front
panels that were CNC routed with the customer's logo & edge-lit
with LED lighting to provide a dramatic effect. (2) of the
frames were provided with a 4" extruded column to support a
digital projector. Blue pvc side panels & a laminated wood
top provided product support. The rear of each cabinet had
a pvc access door for excess storage of product, literature &
personal belongings. |
 |
|
 |
30mm extrusions were used to provide a
lightweight yet rigid solution for 12' product displays that had
graphics applied as well as product support hooks. The
focal point of these sections was an additional 6' high section
bolted on top to create an intimidating 18' tall tower effect. The wall sections are hinged together to be configured in various angles to maximize booth presentation & direct foot-traffic. |
 |
 |
FTI 30mm extrusions were provided
for a hinged back-drop to provide product & graphics display.
Modular 4' wall sections were shipped in a re-usable container. |
 |